ZEPHYR corporation Japan

. Parking Gate Bar system
. 100% inspection equipment for products ( for FA )
. Precision measuring equipment
. Bicycle parking system
. Appropriate Diagnosis Equipment

We are ready to discuss customers requirements in constructing special machinery, systems and products utilizing our core technology--motor control, as well as products that use microcomputer-control. We also offer volume production in our factories, and OEM sales.

Control method	PLC & Micro-computer control
Motor	DC brush-less Motor （ 30W, to 45W ） 3pcs.
Capacity	3Kgs on the top of the hand interface
Input Power	AC90V to 110 （ 50/60Hz ） AC180V to 220V （ 50/60Hz ） ※1
Power consumption	300VA ( Max ）
Interface	INPUT: Photo-coupler isolated 8 lines max OUTPUT: Open collector 4 lines ※2
Typical functions	Automatic self-learning Continuous press motion when stopped Z axis. Working Speed setting Detecting over loaded External output signals closed/opened/busy/trouble )
Option equipment	Safety sensor for obstacle detecting UPS Voice guidance system

Zephyr has many years of working in the fields of FA or factory automation and LA or laboratory automation. With this as our foundation, the company developed the TR-600xx-3J series robot, a simple and affordable 3-axis orthogonal robot. this is best suited for tool-changing. The operation of the TR-600xx-3J series has been simplified, enabling our customers to do onsite adjustments, and lowering the cost of service, repair and maintenance.
We are able to construct affordable systems for our customers' exclusive applications. Contact us for our innovative ideas and designs.

The desk type was improved so that it might be easy to install an Eco.switch on a desk.
This is an all-in-one type with an AC socket and built-in AC plug.
It has the same function and quickly transforms your desk light into a sensor light.
Attachment is made for easy installation to an office desk through the use of a magnet system. In addition, there is an attachment board. Basides the desk light, there are many other possibilities for the Eco.switch, such as switching the electric fan, a step heater, a monitor ( Max 300W/3A ).
With imagination, there are endless and exciting applications.

Control method	CMOS　IC
Sensor	Infrared motion sensing
Input Power	AC180V to 220V ( 50/60Hz )
Power consumption	less than 1W (Max)
Interface	1a non voltage contact ( 300W Max )
Safety design	Insulated trans & fuse
Diameter	108φ
Typical function	Power supply light LED ( orange ) Active detecting LED ( blue ) Variable delay timer ( 10s to 5min) Hold switch ( Emergency relay action fixation ) ※1 Nightlight ( Clear white / warm white ※2

Variable off delay timer, Sensor-less system, nightlight, Eco.switch: we are proposing a new sensor switch which has a off delay function for detecting human action and for safety operations. It is being offered at a reasonable price.
There are 2 other types of Eco.switch which detects based on sensitivity and on spotting. It is designed to fit your environmental needs.
This is a new style and newly designed switch to save energy for your environmental improvement.
The" Basic type" of the simple function is released.
More products are available of the basic type Eco.switch.
The ceiling embedded type uses light and operates when the outside is 108φ .Your efforts protect the earth environment!

Control method	Micro-computer control or PLC
Motor	DC brush-less Motor（ 30W to 50W ） *1 AC Motor ( single phased, 3 phased )
Capacity	8m to 15m
Input Power	AC90V to 110 （ 50/60Hz ） AC180V to 220V （ 50/60Hz ） *2
Power consumption	100VA （ Max ）
Interface	INPUT: Photo-coupler isoration 12 lines max OUTPUT: Open collector 8 lines max *3
Typical functions	Automatic self-learning Continuous press motion when completely closed. Working Speed setting Detecting over loaded Motor torque setting Smoke detect equipment linkage External forcible Open/Close Warning when door close ( Alarm light or voice ) External output signals ( closed/opened/busy/trouble ) *4

Our side-sliding shutter utilizes the motor control perfected in our automatic door product.
Similar to the automatic door, fine motor control is possible with the sliding shutter. ( picture below shows an example of the sliding shutter application ) .

The upper model which realized further space-saving based on the slide door of ZEPHYR is "W-slide door."
W-slide door has the structure that two doors house in one door case, so a door case space can be managed with an abbreviation half.
Further, It can keep the open space which is almost equal space of a slide door ( double ).
Moreover, it is hard to break by an original simple mechanism, and excels not only in a price but in maintenance, and though it is a higher model, contribute to a cost cut.

Control method	Micro-computer control
Motor	DC brush-less Motor （ 30W to 50W ） *1
Capacity	20kgs to 150kgs
Input Power	AC90V to 110 （ 50/60Hz ）, AC180V to 220V （ 50/60Hz ） *2
Power consumption	100VA （ Max ）
Interface	INPUT: Photo-coupler isoration 12 lines max, OUTPUT: Open collector 8 lines *3
Typical function	Automatic self-learning Partial ( Half ) stroke operation Half cycle operation Half cycle and partial stroke combination operation Variable stroke operation Continuous press motion when completely closed Working Speed setting Open hold timer adjustment Motor Torque and break torque setting
Safety feature	safety stop/ safety return when detecting over loaded Operation with various Safety sensors Smoke detect equipment linkage External forcible Open/Close Warning when door close ( Alarm light or voice )

Zephyr's automatic door operator utilizes DC brushless motors, and because it has a self-learning function based on microcomputer control, it is easy to configure. Its compact design allows excellent flexibility in placement and setting in the home.
It is also very safe, energy-efficient and maintenance-free. With a wide selection to chose from lightweight to heavyweight doors, we can construct a system that is most suitable for your needs.
Apart from our standard products, Zephyr's speciality is supplying OEM products, and interfacing them to different peripheral equipment as well as to customize them to specifications.
you can be assured of our products since our Manila-based support center services our markets in China, Taiwan, the Philippines and other overseas locations.